Case study.

Some notices from above configuration:
+The OSPF network type between R2&R3 is non broadcast.
Q1: Show ip ospf database
Q2: Show ip ospf interface serial 1/0
Q3: Show ip ospf
Q4: Show ip route
You have been asked to evaluate an OSPF network and to answer questions a customer has about its operation. Note: You are not allowed to use the show running-config command.

Although in this sim we are not allowed to use "show running-config" command but we post the configuration here so that you can understand more about the topology.
R1
interface Loopback0
ip address 1.1.1.1 255.255.255.255
no shut
interface Serial0/0
ip address 192.168.13.1 255.255.255.0
ip ospf network non-broadcast
no shut
router ospf 1
network 192.168.13.0 0.0.0.255 area 0
network 1.1.1.1 0.0.0.0 area 0
_______________________________________
R2
interface Loopback 0
ip address 2.2.2.2 255.255.255.255
no shut
interface S0/0
ip address 192.168.23.2 255.255.255.0
ip ospf network non-broadcast
no shut
router ospf 1
network 192.168.23.0 0.0.0.255 area 0
network 2.2.2.2 0.0.0.0 area 0
neighbor 192.168.23.3
_________________________________________________
R3
interface Loopback 0
ip address 3.3.3.3 255.255.255.255
no shut
interface fa0/0
ip address 192.168.34.3 255.255.255.0
no shut
interface S0/1
ip address 192.168.23.3 255.255.255.0
ip ospf network non-broadcast
no shut
interface S0/0
ip address 192.168.13.3 255.255.255.0
ip ospf network non-broadcast
no shut
router ospf 1
network 192.168.13.0 0.0.0.255 area 0
network 192.168.23.0 0.0.0.255 area 0
network 192.168.34.0 0.0.0.255 area 1
network 3.3.3.3 0.0.0.0 area 0
area 1 virtual-link 4.4.4.4
neighbor 192.168.23.2
_______________________________________________________________
R4
interface Loopback 0
ip address 4.4.4.4 255.255.255.255
interface FastEthernet0/0
ip address 192.168.34.4 255.255.255.0
interface Fa0/1
ip address 192.168.45.4 255.255.255.0
no shut
interface Fa1/0
ip address 192.168.46.4 255.255.255.0
no shut
router ospf 1
network 192.168.34.0 0.0.0.255 area 1
network 192.168.45.0 0.0.0.255 area 2
network 192.168.46.0 0.0.0.255 area 3
network 4.4.4.4 0.0.0.0 area 1
area 1 virtual-link 3.3.3.3
area 2 nssa
area 3 stub no-summary
_________________________________________________________________
R5
interface Loopback0
ip address 5.5.5.5 255.255.255.255
interface Loopback1
ip address 5.5.1.1 255.255.255.255
interface Loopback2
ip address 5.5.2.1 255.255.255.255
interface Loopback3
ip address 5.5.3.1 255.255.255.255
interface Loopback4
ip address 5.5.4.1 255.255.255.255
no shut
interface Fa0/0
ip address 192.168.45.5 255.255.255.0
no shut
router ospf 1
network 192.168.45.0 0.0.0.255 area 2
network 5.5.0.0 0.0.255.255 area 2
area 2 nssa
_______________________________________________
R6
interface Fa0/0
ip address 192.168.46.6 255.255.255.0
no shut
interface Loopback 0
ip address 6.6.6.6 255.255.255.255
no shut
router ospf 1
network 192.168.46.0 0.0.0.255 area 3
network 6.6.6.6 0.0.0.0 area 3
area 3 stub
Which of the following statements is true about the serial links that terminate in R3?