Answer B,C is correct: B. Enable the Status option.; C. Set the Radio Policy option to 802.11g Only.. To allow only high-speed 2.4-GHz clients on the WLAN, the WLAN must be enabled and its radio policy must be limited to 802.11g only. 802.11g operates in the 2.4-GHz band and supports higher data rates than 802.11 b. Broadcasting the SSID is not required to restrict client data rates or band capability, and 802.11a is a 5- GHz standard rather than 2.4 GHz. Cisco CCNA 200-301 v1.1 Network Access expects engineers to distinguish wireless bands and PHY standards when configuring WLAN policy. The corrected answer pair is enabling the WLAN status and setting the radio policy to 802.11g Only. That combination activates the WLAN and restricts association to the intended high-speed 2.4-GHz client type.