When a network interface's indicator lights are not blinking on either the computer or the switch, it suggests a physical layer issue. Here is the detailed reasoning:
Ethernet Properly Connected: The Ethernet cable is correctly connected, eliminating issues related to a loose or faulty cable.
No Indicator Lights: The absence of blinking indicator lights on both the computer and the switch typically points to the port being administratively shut down.
Switch Port Shut Down: In networking, a switch port can be administratively shut down, disabling it from passing any traffic. This state is configured by network administrators and can be verified and changed using the command-line interface (CLI) of the switch.
Command to Check and Enable Port:
bash
Copy code
Switch> enable
Switch# configure terminal
Switch(config)# interface [interface id]
Switch(config-if)# no shutdown
The command no shutdown re-enables the interface if it was previously disabled. This will restore the link and the indicator lights should start blinking, showing activity.