実験シミュレーション12
ガイドライン
これは、仮想デバイス上でタスクを実行する実験課題です。
* この実験項目のタスクを確認するには、「タスク」タブを参照してください。
* デバイスコンソールにアクセスしてタスクを実行するには、「トポロジー」タブを参照してください。
* コンソールへのアクセスは、デバイスアイコンをクリックするか、コンソールウィンドウの上にあるタブを使用することで、必要なすべてのデバイスで利用できます。
必要な事前設定はすべて完了しました。
* デバイスの有効化パスワードやホスト名を変更しないでください。
* 既存のルーティングポリシーや設定を置き換えないでください。
次の項目に進む前に、設定をNVRAMに保存してください。
* 画面下部の「次へ」をクリックして、この実験を提出し、次の問題に進んでください。
* 「次へ」をクリックすると、ラボが閉じられ、再度開くことはできません。
トポロジー

タスク
以下の目標を達成するために、トポロジーに従ってハブアンドスポークルーターを設定してください。
1. ハブとスポーク間のエンドツーエンドの到達可能性を確保するために、mGREネイバーシップを設定します。
2. パスワード「C!$c0123」を使用してNHRP認証を設定します。NHRPメンバーの保持時間を180秒に設定し、NHSはネクストホップクライアントのNBMA登録メッセージを60秒間保持する必要があります。
PC1からPC2およびPC3へのpingを実行して設定を確認してください。
正解:
To configure the HUB and SPOKE routers according to the given topology and achieve the goals, follow the steps below:
Hub Router Configuration (R0):
interface Tunnel0
ip address 10.0.0.254 255.255.255.0
no ip redirects
ip nhrp authentication C!$c0123
ip nhrp map multicast dynamic
ip nhrp holdtime 180
ip nhrp network-id 1
tunnel source e0/0
tunnel mode gre multipoint
Spoke Router 1 Configuration (R1):
interface Tunnel0
ip address 10.0.0.1 255.255.255.0
no ip redirects
ip nhrp authentication C!$c0123
ip nhrp map 10.0.0.254 <Hub-NBMA-IP> # Replace <Hub-NBMA-IP> with the
Hub router's physical interface IP
ip nhrp nhs 10.0.0.254
ip nhrp holdtime 180
tunnel source e0/0
tunnel mode gre multipoint
Spoke Router 2 Configuration (R2):
interface Tunnel0
ip address 10.0.0.2 255.255.255.0
no ip redirects
ip nhrp authentication C!$c0123
ip nhrp map 10.0.0.254 <Hub-NBMA-IP> # Replace <Hub-NBMA-IP> with the
Hub router's physical interface IP
ip nhrp nhs 10.0.0.254
ip nhrp holdtime 180
tunnel source e0/0
tunnel mode gre multipoint
Additional Configurations (Common):
On all routers, ensure EIGRP or OSPF is configured to advertise the tunnel network and connected networks.
Example using EIGRP:
router eigrp 100
network 10.0.0.0 0.0.0.255
network 10.100.0.0 0.0.0.255
Verification:
1. Verify NHRP Configuration: On each router:
show ip nhrp
2. Verify Tunnel Connectivity: From PC1, ping PC2 and PC3:
ping 10.100.1.10 # Ping from PC1 to PC2
ping 10.100.2.10 # Ping from PC1 to PC3
3. Verify routing on all routers:
show ip route